GB(4) | Kernel Interfaces Manual (HP300) | GB(4) |
The 98700 can be used as the only graphics device on a system, in which case it will be used as the system console. It can also be installed as a secondary display device. For the first case, the HP 98287A M.A.D. interface card should be set to internal control space. This will put the frame buffer at the DIO address 0x200000 and the control registers at 0x560000. At this address it will be the “preferred” console device (see cons(4)). For use as a secondary device, the 98287A should be set to frame buffer address 0x300000, and to an external select code.
It should be noted that this configuration will conflict with the 98547 display card which has a 2 megabyte frame buffer starting at address 0x200000. The 98700 should only be installed as a secondary device in a machine with a 1 bit 98544 display card or 4 bit 98545 card. The 98700H Installation Guide contains further configuration information.
February 9, 2011 | NetBSD 6.0 |